20100821

The Thinking Room

At least that's what it is when I'm able to sit down, relax, and let nature flow... Not quite the same at Kaiam.  This is our squat toilet, which is really well designed with a sealed lid to keep the bugs out, a mostly leak proof roof for when it's raining, and an interesting view of the forest behind our house.  It would make a great thinking room if not for the quite uncomfortable position you are forced into to keep from $@*!ing on your feet.

Between the extreme heat, and prevalence of biting insects, this ranks as a solid #3 on the list of reasons I'm not excited about heading back down to Kaiam.  Good thing there's lots of greens to eat there... ;-)

Macro Sweat Bee

One of the most hilarious, but absolutely annoying creatures might be this little sweat bee.  Why do you ask?  Well, first of all how does it fly?  It has this really fat body and tiny wings.  In humming birds this trait works out fabulously, but in these little guys, well, Dumbo flew better.  They don't so much fly toward you as crash into you.  Not graceful.

What makes them absolutely annoying is the fact that they are drawn to sweat, and at Kaiam there seems to be plenty of that to go around.  These little guys crash land on your body, but since they're so small you hardly notice them.  As they walk across the surface of your skin they drag themselves through the forest causing a mild irritation.  If you sweep your hand across them, they act like spiders and hold fast, so the best thing to do turns out to be smashing them into your skin.  Good thing they don't have stingers.  They actually make honey from the sweat that they gather.  I haven't tasted it, but Anton has and he says that it is quite salty in flavor.  One time when he was at Kaiam they were covered with these bees and went searching for their home.  It turned out to be a small hole in a dead tree full of gloriously salty revenge.

20100820

Perfected Spring Steel Bearing Puller

Say that five times fast...

We had another bearing fail on the little tractor but there was a small problem: Before, when that bearing had failed, the Lutz's took the part to Mt. Hagen and the shop there had to weld something onto the part in order to pull against to take it apart.  We were not exactly thrilled about the idea of having to do this again, so we set out to build a bearing puller that would slide into the 1/16" gap between the gear and the casting in order to remove it.  Pictured is the result after nearly five hours of work.  The basic thought was to shave down two 1/8" spring steel plates so that they would slide into place, then weld something to them that would allow us to put the whole contraption in the 30 ton hydraulic press.

Of course we started out with a much less durable form of similar design.  The first one I ha just one cross brace on, which popped off without much pressure.  The second attempt broke my stitch welds (or rather ripped out part of the spring steel because the welds didn't penetrate the hard steel far enough) on the horizontal pieces.

At the time I was feeling wonderful because of some bad chicken I'd had in Mt. Hagen earlier in the day, so Anton went to work grinding out welds, and re-welding one of the pieces all the way around while I laid down for an hour or so.  When I came back, I re-welded one of the pieces and then we were ready to put it all in the press.

After the pressure built up to about 18 tons, we were questioning the strength of our newly rebuilt device and decided that this was enough pressure, so we broke out the torch and heated the casting up a little bit.  By a little bit, I mean about thirty seconds of heat and we heard a huge "POP!" ... It sounded like a weld breaking but we were quite happy to see that the part we wanted to move had indeed started to slip off.  It still took about 10 ton of continuous pressure to remove, but at this point we pumped the hydraulics as fast as we could.

That night we were on top of the world!  Pretty nice to build a specialized puller and successfully use it in just a few hours...  We certainly couldn't have done this at Kaiam, so it reinforced the decision to fly the part out and fix it in Mambis.  I will be accompanying it back down to Kaiam on Monday!

20100813

the Coke side of PNG

Have you ever taken one of those photos that looks like it came right
out of a commercial? Well, a few weeks (months?) ago, I took one of
those and sometimes you can't keep those photos to yourself... So, I
went online and found some free fonts that resembled the fonts used the
real adds. This was the result. Almost looks like I took it straight
out of a magazine or something.

For a little back information: Coka-Cola is the only soda company in
PNG. Years ago Pepsi was here, but between a very good add campaign and
other things there is no longer any competition from other companies and
we're left with Coke as the official soft-drink of PNG. I don't think
it hurts that the red and white fits right in line with PNG's colors.
They also have these really nice billboards and wall sized adds that
read: "Coke and Kai"... Kai-kai means food in pidgin.

It's pretty common to see Coke cans and 500ml bottles around. Most
little trade stores sell them. The cans can also be recycled at various
places but for about a kilo of aluminum you only get about 4 Kina (a
little more than a U.S. dollar), and it takes a lot of cans of Coke to
add up to that. That doesn't mean no one recycles them... And it's
always fun to see a couple hundred cans lying in the roadway to make
aluminum pancakes.